Accessoires voor SLR behuizingen

Conversion Lenses and Accessories

Close-UP Lens 125

(Product No.52119)
By attaching the lens to the housing with the M62 mount or a macro port, macro photography beyond the camera’s or the lens’s original performance will become possible. Using the M67-M62 Step Down Ring, the lens can be mounted on the DX Macro Port 50 II. With the M52-M62 Step Up Ring, the lens can be mounted on Olympus’s various waterproof cases.*Enlarged image
[ Specifications ]

[Lens construction] 2 elements in 2 groups (multi-coated)
[Focal length] 125mm (equivalent to close-up lens No.8)
[Dimensions (DIAxD)] 74×9.5mm / 3×0.4inch
*Compatible Olympus waterproof cases: PT-045/047 and the PT-048 (as of May 2011).
*In order to mount the lens onto the DX-1G, the DX-2G or the DX-1200HD, a close-up ring will be required. (More than two lenses can be mounted.)
*When the lens is used, move the zoom lens to the tele position.
*When the lens is mounted, the depth of field will be narrowed.

Close-UP Lens 125

M67-M62 Step Down Ring

(Product No.58122)
The ring’’s diameter on the camera/housing side is 67mm and the diameter on the lens side is 62mm. The Close-Up Lens 125 can be mounted with the ring.
*When the Close-Up Lens 125 is mounted, the depth of field will be narrowed.*Enlarged image
*System sample
[ Specifications ]

[Dimensions (DIAxD)] 69×5.5mm / 2.8×0.2inch
[Weight] Approx. 8.6g / 0.3oz
[Construction] Corrosion-resistant alminum alloy

TTL Converters

Optical YS Converter/N1 for MDX housing
(Product No.50126)
A compact unit that converts the camera’s TTL signal to a light signal. The converter can be mounted on the camera’s accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s) (*). TTL and manual modes can be switched by pushing the mode switch on the housing.
* SEA&SEA’s Fiber-Optic Cable II must be used with an Optical YS Converter.*Enlarged image
FAQ
[youtube id=”vM2xd3NtVvQ”]

[ Specifications ]

[Controls] Power ON/Power OFF/TTL mode (indicated by blue lamp)/Manual mode (indicated by green lamp)
* Remaining battery level is indicated by flashing LED lamp.
[Auto Power Off]  The converter will automatically power off if the shutter lever or the mode switch is not activated for more than one hour.
* The converter can be re-activated by pressing the mode switch.
[Power Source] 2 x AAA battery (Alkaline: 3.0V / Ni-MH: 2.4V)
[Power Source] (*1) Alkaline: 15 hours / Mi-MH: 12 hours  (*2)
[Construction] Aluminum alloy (case)
[Dimensions (WxHxD)] 54.4 x 39.5 x 53.3mm / 2.1 x 1.6 x 2.1 inches  (without cable)
[Weight] 154g / 5.4oz.
(Housing(s) compatible with Optical YS Converter/N1):  MDX-D7100
*1 Operating time depends on the battery brand, temperature and frequency of use.
*2 Operating time tested on 750 mAh batteries.

Optical YS Converter/N1 for MDX housing

YS Converter/C

(Product No.50118)

O-ring Set
(Product No. 62140)This converter can be used to attach an external strobe to Canon digital SLR camera housings and allows for TTL adjustment.This new type of converter lets you use simultaneously two different types of strobes with different discharge characteristics and flash tubes, simply by turning the strobe selector dial. You can also switch between TTL mode and manual mode* depending on the shooting situation. Moreover, you can check the images taken with TTL mode on the LCD monitor of the camera and use the TTL adjustment dial to easily make fine adjustments to the level of light emitted.*Switching to manual on the converter means activating the manual function on the connected YS Series strobe (depending on the strobe model).

*Enlarged image

YS Converter/C promotional movie
*Click “YouTube” to link there. During video play, the resolution (360p, 480p, 720p) can be changed for higher quality.

[ Specifications ]

[Construction] Main body: polycarbonate, Fixing knob: ABS resin, Mounting plate: corrosion-resistant aluminum alloy (alumite coating)
[Controls] OFF / Manual / TTL adjustment dial (from +2 to -2 in 1/3 increments), Strobe selector dial (x 2)
[Battery] CR2 lithium battery (included)
[Strobe-side connector] x 2 (for Sync cord/N)
[Depth rating] 60m / 200ft
[Dimensions (WxHxD)] 68x90x103mm / 2.7×3.6×4.1inch
[Weight] Approx. 400g / 12.3oz (including CR2 battery)
[Compatible strobe] YS-110α, YS-250PRO

Uploaded: Sample images captured by YS Converter/C

YS Converter/C

YS Converter/N
(Product No.50117)
O-ring Set
(Product No.62140)This converter can be used to attach an external strobe to Nikon digital SLR camera housings and allows for TTL adjustment.This new type of converter lets you use simultaneously two different types of strobes with different discharge characteristics and flash tubes, simply by turning the strobe selector dial. You can also switch between TTL mode and manual mode* depending on the shooting situation. Moreover, you can check the images taken with TTL mode on the LCD monitor of the camera and use the TTL adjustment dial to easily make fine adjustments to the level of light emitted.*Switching to manual on the converter means activating the manual function on the connected YS Series strobe (depending on the strobe model).

*Enlarged image

[ Specifications ]

[Construction] Main body: polycarbonate, Fixing knob: ABS resin, Mounting plate: corrosion-resistant aluminum alloy (alumite coating)
[Controls] OFF / Manual / TTL adjustment dial (from +2 to -2 in 1/3 increments), Strobe selector dial (x 2)
[Battery] CR2 lithium battery (included)
[Strobe-side connector] x 2 (for Sync cord/N)
[Depth rating] 60m / 200ft
[Dimensions (WxHxD)] 68x90x103mm / 2.7×3.6×4.1inch
[Weight] Approx. 400g / 12.3oz (including CR2 battery)
[Compatible strobe] YS-110α, YS-250PRO

YS Converter/N

Viewfinders

VF180 1.2x
(Product No.46112)
Straight prism viewfinder compatible with both the RDX and MDX series housings. Can be attached to the housing by replacing the original viewfinder. The magnification ratio is 1.2x without sacrificing the field of view. As the VF180 1.2x is straight finder, you can compose your images as if you are looking directly through the camera’s viewfinder. Its 8 element 6 group optical lenses reproduce natural colors. The viewfinder is filled with nitrogen gas to prevent condensation and fogging. The eyepiece guard helps provide a clear view as it does not allow light to enter the viewfinder.
* An accessory tool is required for attaching the viewfinder to the housing.*Enlarged image
[ Specifications ]

[Construction] corrosion-resistant aluminum alloy [anodized body (Black)]
[Depth rating] 100m / 330ft
[Dimensions (DIAxD)] 45x111mm / 1.8×4.4inches
[Weight] 275g / 9.6oz
[Compatible housings]  (models produced after the year 2007) : RDX-600D, RDX-550D (* 2), MDX-5D Mark III, MDX-D800, MDX-D7000, MDX-7D, MDX-D300s, MDX-PRO D700, MDX-PRO 5D Mark II (* 1), MDX-PRO D3 (* 2), MDX-D300 (* 2), MDX-40D (* 2)
*1 Accessory spacer is required to install the viewfinder to the housing.
*2 Factory modification is required to install the viewfinder. Contact an official SEA&SEA dealer or distributor.

VF180 1.2x

VF45 1.2x
(Product No.46111)
A 45° prism viewfinder (magnification: 1.2x).  The optional VF45 Prism viewfinder replaces your housing’s original viewfinder and offers superior vision. Covering the entire field of view, the VF45 enhances magnification by 1.2x and enables subtle framing and focusing of subjects.
The eyepiece rotates 360° in increments of 90° to provide the ideal camera position in either landscape or portrait. The 45 degree prism viewfinder is ideal for all conditions, but especially suited for macro photography when the camera is often positioned lower than the photographer.
The ergonomically designed eyepiece prevents unnecessary light from entering, allowing clear and precise images through the viewfinder.
[ Specifications ]

[Construction] corrosion-resistant aluminum alloy [anodized body (Black)]
[Depth rating] 100m / 330ft
[Dimensions (WxHxD)] 57.5×98.7x96mm / 2.3×3.9×3.8inch
[Weight] 390g / 13.7oz
[Compatible housings] MDX-5D Mark III, MDX-D800, MDX-D7000, MDX-7D, MDX-D300s, MDX-PRO D700, MDX-PRO 5D Mark II (*1), MDX-PRO D3 (*3), MDX-D300 (*2), MDX-40D (*2)
*1 Accessory spacer is required to install the viewfinder to the housing
*2 Factory modification is required to install the viewfinder. Contact an official SEA&SEA dealer or distributor.

VF45 1.2x

Optical Viewfinder 0.8x
(Product No.46104)
We recommend this viewfinder for near-sighted users and for photographers who want to make sure the focus is clear in the center of the image during macro photography. You can interchange this viewfinder with the standard pickup viewfinder to best suit your needs.
*The reflected image appears in the four corners of the viewfinder.*Enlarged image

Optical Viewfinder 0.8x

Optical Viewfinder 0.66x
(Product No.46109)
Standard viewfinder that provides good visibility for the entire field of view.
*The reflected image appears in the four corners of the viewfinder.*Enlarged image

Optical Viewfinder 0.66x

Optical Viewfinder 0.5x
(Product No.46108)
Reduces vignetting in the viewfinder’s image. Recommended for wide-angle photography or other situations when it is essential to check the overall composition of the picture. Depending on the situation, the viewfinder can be replaced with a standard pick-up viewfinder.
*The reflected image appears in the four corners of the viewfinder depending on the camera model.*Enlarged image

Optical Viewfinder 0.5x

 

Other Accessories

Housing Lanyard III
(Product No.46114)
Improved housing lanyard. Ideal accessory for carrying a housing.
The hooks of the lanyard are equipped with rubber covered quick snaps to reduce noise. The lanyard is compatible with Housing Lanyard III / all MDX housings.*Enlarged image

Housing Lanyard III

Optional Leak Sensor
(Product No.46115)
The sensor immediately alerts you to any water leakage by super luminosity LED lighting up.

Optional YS Converter / N 5-pin Connector
(Product No.50123)
User replaceable 5-pin strobe connector and sync connector set. The connector set can be fixed after removing cap for accessory port.
*  The connector set is required to connect the YS Converter / N to SEA&SEA housings for Nikon digital SLR cameras which are equipped with accessory port as standard.

Optional YS Converter / N 5-pin Connector

Optional YS Converter / C 6-pin Connector
(Product No.50121)
User replaceable 6-pin strobe connecter and sync connecter set. The connecter set can be fixed after removing cap for accessory port.
* The connector set is required to connect the YS Converter/C to SEA&SEA housings for Canon digital SLR cameras which are equipped with accessory port as standard.

Optional YS Converter / C 6-pin Connector

Optional Sync Cord 2-pin Connector
(Product No.50122)
User replaceable 2-pin strobe connector and sync connecter set. The connector set can be fixed after removing cap for accessory port.
* The connector set is required to connect the YS series strobes via sync cord to SEA&SEA housings for digital SLR cameras which are equipped with accessory port as standard.

Optional Sync Cord 2-pin Connector

Optional Sync Cord Connector N
(Product No.50119)
The set consists of replaceable strobe connector and sync connector. The connector can be attached to the housing with accessory tool and nut after removing the connector cap.
*Compatible housing: The MDX-D7000

Optional Sync Cord Connector N

New Housing Lanyard
(Product No.56061)
Attaches to the hand grips. A safe and convenient way to carry your housing.  It can be attached to any SEA&SEA housing model.

New Housing Lanyard