MDX-Alpha6300 behuizing voor Sony Alpha 6500 / 6300 / 6000
MDX-α6300 Housing (Black) (Housing only)
Compatible with the SONY α6000, α6300 and α6500 cameras
* When the housing accommodates the α6500, the camera’s C1/C2 buttons cannot be used.
* MDX-α6300 housings with the following serial numbers (last four digit numbers) are compatible with all the aforementioned cameras;
Black: 0020 – 0028 and above 0037
Orange: 0004, 0005, 0009 and 0010
Light Blue: Above 0004
* MDX-α6300 housings with serial numbers other than those listed above are only compatible with α6000 and α6300 cameras.
Improved underwater weight.
The weight of the MDX-α6300 is roughly the same as the MDX-α6000.
However, the underwater weight has been improved by redesigning key
components and precision machining.
SA8 accessories can be fitted.
The MDX-a6300 is compatible with SA8 accessories,
making it a compact, high quality system.
Two ergonomic thumb rests available on the rear case.
When the SA8 Tray and Grips are not in use,
the two ergonomic thumb rests may be used to
securely grip the housing.
ML Hand Strap can be fitted
The ML Hand Strap is recommended
when a tray and grip are not used.
The ML Hand Strap allows you to
securely grip the housing with one hand.
The housing offers two accessory ports.
One port may be used with the optional N-type (two pin) strobe connector.
The other port may be used with the optional Leak Sentinel (vacuum system).
The 5-pin Sync Cord/N may be used when connecting a strobe (such as YS-D2)
to the housing, allowing for accurate rapid strobe firing.
LCD Monitor Hood with Lens can be fitted
The hood reduces reflections and provides a clear and complete view of the cameras LCD screen.
MDX-α6300 Other Features
-All camera functions can be used underwater.
-Equipped with two Fiber-Optic Cable sockets.
-Equipped with a lens release button.
-Port lock may be activated from outside of the housing.
-High-performance luminescent buttons. Controls will glow in low light conditions.
-The camera’s built-in flash can be activated and deactivated from the housing using the Built-in flash activation button and the Flash disablement lever.
-Optional Leak Sensor can be built into the housing. Its LED lamp is located in the LCD monitor window.
-Use of the hand-strap is recommended when a camera tray (stay) is not used. The hand strap helps you hold the housing with just one hand.
-Equipped with two sacrificial zinc diodes (one on the front case and the second on the rear) to avoid electrolysis damage.
MDX-α6300 [Construction] Body: corrosion-resistant aluminum alloy (machined)
[Depth rating] 75m / 250ft
[Dimensions (WxHxD)] 195 x 125 x 100 mm / 7.7 x 4.9 x 3.9 inches
[Weight] Approx.1,265 g / 44.7 oz (Housing only)